Car Side Mirror Replacement Guide

The process of replacing a side mirror varies from model to model and by the kind of damage that occurred. There is a complete process for Car side mirror replacement, which involves certain equipment’s and guidelines. You can get your vehicle’s side mirror replacement from used auto part at reasonable prices rather than getting a new one.
Here’s a step-by-step guide to help you with side mirror replacement:

Equipment’s required:

• It is quite important that the replacement mirror matches the make, model, and year of your car for perfect replacement.
• Phillips and flathead screwdrivers.
• A socket wrench or spanner
• A plastic trim removal tool
• Adhesive (if it’s a stick-on glass replacement).
• Safety gloves.

Process for Side Mirror Replacement:

The complete process of side mirror replacement consists of several steps mentioned as below:

Estimate the Damage

• First of all check, if the mirror is cracked but the housing is perfect. In this case, you only need to replace the glass.
• Secondly, If the entire assembly is damaged. In this scenario, you have to replace the entire mirror unit.

Place an Order for Replacement

Make sure that while placing an order you should use your car’s make, model, and year to find the right replacement part. You can access car-partsusa.com to find the best fit you’re your vehicle in your nearest location.

Remove the Interior Door Panel (if needed)

• To start with the process firstly opens the car door.
• Then you have to locate the screws or clips holding the interior door panel.
• Now make sure to remove the panel carefully by using a screwdriver or a trim removal tool.
• Disconnect any cables for Interior Parts like door controls or speakers, if necessary.

Remove the Old Side Mirror

• Locate the screws or bolts securing the mirror from inside the door.
• Disconnect the mirror’s wiring harness (for power mirrors).
• Unscrew the bolts and remove the old mirror assembly

Install the New Side Mirror

• Position the new mirror assembly.
• Screw it in place securely using the bolts or screws.
• Reconnect the wiring harness (if applicable).

Reattach the Door Panel

• Align the door panel and snap or screw it back into place.
• Reconnect any wiring for door controls or speakers as needed.

Test the Mirror

Adjust the mirror manually or use the control switch to ensure its functioning properly.
• Verify that it is secure and aligned correctly.

Other Successful Guidelines:

• It is always advisable to follow the instructions mentioned in your car’s manual for specific inputs for mirror replacement.
• Try to be gentle while removing and fixing parts to avoid breaking clips or damaging wires.
• If the mirror is part of a heated or power system, ensure the wiring is correctly connected to avoid future issues.

Conclusion

This is all about the Car side mirror replacement process in detail; you can follow the instructions to perform the same. For further assistance, you can always connect with the customer support team.